This is a draft site

The WSS-PC-I00 AA Sounder + Strobe is a loop-powered audible and visual alarm device that plugs in to System Sensor analogue addressable detector bases such as the B501AP.

Each WSS-PC-I00 can be individually activated (addressed) by a fire panel over an analogue addressable loop.

Two audible alarm tones can be controlled by the fire panel. These tones indicate alarm Stage 1 (Evacuate) and alarm Stage 2 (Alert). The pair of tones may be configured from any one of 32 optional two-stage tone-sets.

The WSS-PC-I00 is compatible with the optional anti-tamper feature on the B501AP and compatible detector bases. When activated, the anti-tamper feature inhibits unauthorised removal of the alarm device.

The B501AP base has a continuity spring which allows field wiring continuity to be checked without the device plugged in.

The WSS-PC-I00 is independently certified to AS ISO 7240.3:2014 and AS ISO 7240.23:2014 (Class O).

Features

• Addressable audible and visual alarm device
• Suitable for mounting on wall or ceiling
• Plugs in to B501AP and compatible detector bases
• Strobe flashes once per second (1 Hz)
• Three volume settings, configurable by DIP switch
• 32 DIP switch configurable audible tone sets including ISO 8201 temporal pattern (T3) evacuation signal
• Rotary address switches for loop address configuration
• Up to 99 addresses available
• B501AP base facilitates loop continuity test without WSS-PC-I00 device plugged in
• Built-in loop isolator
• DIP switches accessible only when the device is not plugged in to a base
• Compatible with detector base anti-tamper feature
• Independently tested and SAI Global StandardsMark certified to AS ISO 7240.3:2014 and AS ISO 7240.23:2014 (Class O)

Note: WSS-PC-I00 sounder + strobes are not compatible with the B501AUS detector base. They need the deeper B501AP type.

---