This is a draft site

The Analogue Addressable Smoke Detector (2251BPI) is a plug-in photoelectric smoke detector with analogue addressable communication.

The smoke level in the sensor chamber is continuously monitored and reported to the fire panel. For each individual 2251BPI detector, the alarm, fault, and maintenance thresholds are programmable in the fire panel configuration software.

A suitably configured fire panel will identify the location of any detector which has triggered an alarm, fault, or maintenance signal. The fire panel can also identify any active detector by lighting up two red LEDs on the detector housing.

The fire panel may be configured to briefly light up the LEDs (“blink”) when the detector is polled.

The detector’s address on the analogue addressable loop is easily set using rotary address switches.

Features

• Analogue addressable communications
• Automatic drift compensation
• Stable communication with excellent noise immunity
• Smoke sensitivity configurable in the fire panel
• Low standby current
• Rotary address switches
• Address range 1 to 159
• Up to
  • 159 detectors per loop (Pertronic F220, F120A)
  • 99 detectors per loop (Pertronic F100A)
• Dual red LEDs for 360° visibility
• Optional remote LED indicator available (Note 1)
• Compatible with B501AUS, B501AP, and other
• System Sensor B500 series bases
• Independently tested and ActivFire listed to AS 7240.7:2018, certificate afp-3384
• Meets the requirements of NZS 4512:2021 s. 2.16.2

---