This is a draft site

This aspirating smoke detector has four individually addressable inlet pipes (sectors), where, if the measured smoke level is above a user-set threshold, an alarm condition is reported.

Premium detector in the VESDA-E range, with an ultra-wide sensitivity range. Caters perfectly to higher ceiling applications, with a convenient mounting for ease of service and maintenance.

Built on the Flair detection technology, VEP detectors achieve consistent performance over their lifetime through absolute calibration, delivering very early warnings in a wide environment range.

Combines a fail-safe Intelligent Filter, with an advanced clean-air barrier to provide optics protection. Protects in industrial applications and harsh environments up to 2000m2.

A very early warning smoke detector for small, business-critical environments of less than 500 m2. The VLF is the first air sampling smoke detector to use ultrasonic flow sensing.

A very early warning smoke detector to protect small, business-critical environments of less than 250 m2. Air is filtered and light-scattering technology detects small amounts of smoke.

The management and configuration application for Xtralis fire and gas detection systems including VESDA and ICAM. Provides remote access to an Xtralis system via networking options.

Windows-based application simplifies pipe network and design for VESDA aspirating smoke detections systems, with software tools to optimise design.

Aspirating smoke detector, with a -40 degree C operating temperature rating, powered by an external 24V DC power supply, configured with internal DIP switches.

Windows-based application simplifying pipe network specification and design for FAAST FLEX aspirating smoke detection systems, optimising network performance and installation quality.

PipeIQ runs on Windows PCs and laptops, as a configuration and analysis application for FAAST aspirating smoke detection systems.

Analogue addressable smoke detector where maintenance is difficult, point or beam detection isn't appropriate or aesthetics rule out traditional methods.

Conventional aspirating smoke detector where maintenance is difficult, point or beam detectors aren't appropriate or aesthetics rule out traditional methods.

Pipes, fittings, labels, remote sampling points, capillary tubing and related sampling pipe network components for aspirating smoke detection system.

Displays shows real-time indication of VESDA detector status and can be mounted in a detector unit, remote mounting box or 19-inch rack. Push-button switches control display mode.

User friendly configuration and status reporting of detectors, displays and interfaces - all required when installing, commissioning and maintaining a VESDA network.

A 15-pin female connector which enables the VESDA hand-held LCD progammer and HLI to be connected to a VESDAnet for configuration, control and monitoring.

The HLI links a VESDAnet system with a personal computer (PC), allowing users to easily configure, manage and monitor the network.

Interface card which expands input and output communications for the range of Xtralis VESDA VLF smoke detectors. Enhances connectivity, fault detection and monitoring and alarm and fault annunciation.

Provides seamless configuration and monitoring tools from the detector to other VESDAnet devices, including, and allows them to communicate with each other.

Replacement filter cartridge for VESDA LaserCOMPACT, LaserFOCUS, LaserPLUS and LaserSCANNER aspirating smoke detectors.

Funnel-shaped sampling nozzle, and a kit of parts to install it inside a cold storage facility. Recommended for higher humidity areas which may be the result of vehicle and/or pedestrian traffic.

Genuine replacement smart filter cartridge for VESDA-E aspirating smoke detectors.

Genuine replacement filter for the System Sensor FAAST XS, XM and XT series aspirating smoke detectors. Fits models 7100X, 7200BPI, 8100, 8251BPI, 9400X and 9251BPI.

Replacement filter for the FAAST LT and FAAST LT-200 series aspirating smoke detectors, available as a single, or in a pack of six.

USB to Ethernet adaptor most often used to connect a laptop to a FAAST XS, XM or XT aspirating smoke detector.

High-sensitivity photo-electric smoke sensor for the FAAST LT-200 range of aspirating smoke detectors, with a plug-in fitting and rotary address switches for configuring the loop address.