- MENU
- Home
Net2 Network Layout Utility
The F220/Net2 Network System Layout Tool creates a spreadsheet table representing the layout of an F220/Net2 network. This information may help diagnose problems such as network mis-connections, cable breaks, faulty nodes, or duplicate addresses.
To prepare the tool, download the software zip file from our website. Then load the software onto a USB stick, following the instructions in the zip file.
When correctly plugged into a Net2 Network Card, the tool automatically scans the connected network and creates a table listing each connected Net2 network card, its MAC address, and its dial address. The table also shows the connections to each port (NET IN and NET OUT) on each connected network card.
Download the free Net2LayoutTool from https://pertronic.com.au/products/fireutils/product/378
Posted in Product News, Tagged Net2 Network,
Categories
Tags
- AAF
- ADF
- ADM-2
- ADM-4
- Analogue Addressable
- AS ISO 7240.23 VAD
- AS ISO 7240.3 AAD
- Aspirating Smoke Detection
- Attenuation
- Audio
- Audio Distribution Module
- Cabling
- Conventional Detection
- Covid_19
- Deluge System
- Early Warning Fire Detection
- Emergency Telephone System
- Equipment Cabinets
- Events
- Extinguishing Agent Release Systems
- F100A
- F120A
- F220
- FAAST
- Fire Door Holders
- Fire Graphic System
- Fire Indicator Panel
- Fire System Management Application
- FireMap
- FireUtils®
- Heat Detector
- Hydrant Isolation Control
- Indicating Boards
- Local Isolation Valve Control
- Manual Call Points
- Mimics, Repeaters & Interfaces
- Modules
- Net2 Network
- Obscuration
- Occupant Warning
- Open-Area Smoke Imaging Detection (OSID)
- Operations
- Pertronic Offices
- Pertronic White Paper
- Power Supplies
- Product Support
- Purpose-Built Control & Indicating Boards
- Smoke Density
- Sounder Strobe
- Speakers
- Strobe
- Suppression
- Technical Support
- Unwanted Alarm
- Upgrades
- Very Early Warning Fire Detection
- VESDA
- Warning Device
- Weatherproof