Discontinued Products: Panels, Networking, & Software
F120A
Discontinued product: Analogue addressable fire panel with 2 to 20 loops and 4 x 40-character LCD display (Replaced by the F220)
F16
Discontinued Product. Conventional fire alarm control panel with 8 to 32 zones. Complies with NZS 4512:1997 (Replaced by the F16e).
F4: 2010 HW v 4.30
Discontinued product: F4 with hardware version 4.30 (NZS 4512:2010). The F4-3 with hardware > version 5.00 is a drop-in replacement.
F4: 2010 HW v 4.20
Discontinued product: F4 with hardware version 4.20 (NZS 4512:2010). The F4-3 with hardware > version 5.00 is a drop-in replacement.
F4: 1997 HW < v 5
Discontinued product: F4 (NZS 4512:1997). The F4-3 (with hardware > v 5.00) is a drop-in replacement when configured for 1997 compatibility
F1: 2010 (Prior to hardware v5)
Discontinued product: F1 (NZS 4512:2010). The F1-3 (with hardware > v 5.00) is a drop-in replacement when configured for 2010 compatibility
F1-3 2W
Discontinued Product: F1-3 2W fire alarm control panel with single-zone reversal relay board
F1: 1997 (Prior to hardware v5)
Discontinued product: F1 (NZS 4512:1997). The F1-3 (with hardware > v 5.00) is a drop-in replacement when configured for 1997 compatibility
F120AM-3 Full Function Mimic
Discontinued: The F120A system, including F120AM-3 LCD Full Function Mimic, has been replaced by the Pertronic F220 system
F40
Discontinued Product. F40 addressable fire alarm control panel (Replaced by the F100A).
F30
Discontinued Product. F30 conventional fire alarm control panel (Replaced by the F1, F4, and F16).
LED Display Boards
LED display boards for Pertronic fire alarm systems including F100, F120, and F16e
L485 LED Address Controller
Controller for driving multiple LEDs, relays, or open collector outputs from a Pertronic fire alarm control panel's RS-485 bus (Replaced by the L485LAC2).
Agent Release Controller
The AGENTRELEASEC has been replaced by the ARC2.
ACS/LCS
Control stations for extinguishing agent release (fire suppression) systems. May be mounted on the control panel, or at remote locations
LOOPTEST
Discontinued Product. Test set for analogue addressable loop cabling
GPIB
Discontinued Product. Interface between fire alarm control panel and external devices (Replaced by the SPIB product range)
FINDER12.21.0.024 Time Clock
Seven-day timer with single channel form C (change-over) relay output
F120A Utilities
F120A fire system programming and diagnostic application (Replaced by FireUtils).
WMAGDR2440 Door Holder
Discontinued Product. Door Magnet (Replaced by the FDHW Series Fire Door Holders).
GFB24V
Discontinued Product. Gas flood board for F120A, F100A, and F16e fire alarm control panels
IMPEDMETER Impedance Meter
Discontinued Product. Hand-held automatic ac (audio) impedance meter (Replaced by the IMPEDMETER-MK2).
WMAGFB Bracket
Discontinued Product. Door Magnet Floor Bracket (Replaced by the FDHFLBKT).
F100AME
Discontinued Product. Escutcheon plate for flush-mounting the Pertronic LCD Full Function Mimic
Discontinued Products: Detectors, MCPs & Modules
OSI-RIE-34 Beam Detector
Reflected Beam Intelligent Addressable Smoke Detector with swivel-mounted emitter-receiver. Compatible with Pertronic F100A & F220 fire pane
RMK400AP Mounting Kit
Recessed mounting kit for detectors, ivory
B524RTE Detector Base
Plug-in base with change-over relay for analogue addressable detectors
IST200E Module
Interface module for connecting Y72221 galvanic isolator & 22051EISE detectors to a Pertronic analogue addressable loop circuit
22051EISE Detector
Intrinsically-safe analogue addressable plug-in photoelectric smoke detector
ISMTL5526 Relay
Two-channel switch-operated relay with intrinsically-safe outputs
IHD*EK-V
Conventional encapsulated indicating heat detector & cable for harsh environments. Fixed threshold: 57 °C (blue), 125 °C (black)
M210E-CZR Module
Interface between a conventional detection zone and an AA fire panel. Especially suitable for zones in areas subject to explosive atmosphere
7251 Detector
Discontinued Product. Highly sensitive (laser-based) photoelectric smoke detector. (Replaced by the 7351-IV.)
2WT-B Detector
Discontinued Product. Multi-criteria detector, 2-wire, with photoelectric smoke sensor and heat sensor with 58 °C fixed alarm temperature
LHD
Linear heat detection cable. Please note that Pertronic-Anbesec LHD Cable is preferred for new installations
HD
Discontinued Products. Conventional non-indicating heat detectors.
2012J Detector
Discontinued Product. AS 3786-compliant domestic photoelectric smoke detector with sounder and form C relay (Replaced by the 2012/24AUSI).
2012/24AUS Detector
Discontinued Product. Photoelectric smoke detector with sounder, form C relay, and battery (Replaced by the 2012/24AUSI).
9251BPI FAAST XT Intelligent
Discontinued Product. FAAST XT Intelligent Aspirating Smoke Detector
9400X FAAST XT Conventional
Discontinued product. FAAST XT Stand Alone Aspirating Smoke Detector
8251BPI FAAST XM Intelligent
Discontinued product. FAAST XM Intelligent Aspirating Smoke Detector
8100 Conventional Aspirating Smoke Detector
Discontinued product. FAAST XM Stand Alone Aspirating Smoke Detector
7200BPI FAAST XS Intelligent
Discontinued Product. FAAST XS Intelligent Aspirating Smoke Detector
7100X FAAST XS Conventional
Discontinued product. FAAST XS Stand Alone Aspirating Smoke Detector
FAAST LT Intelligent Aspirating Smoke Detectors
Discontinued Product: FAAST LT Intelligent Aspirating Smoke Detectors (Replaced by FAAST LT-200 range).
FAAST LT Conventional Aspirating Smoke Detectors
Discontinued Product. FAAST LT Conventional Aspirating Smoke Detectors (Replaced by FAAST LT-200 range).
VESDA VLS
Discontinued Product. Aspirating smoke detector with laser-based detection and an inlet manifold valve with software to control airflow
M201E-240 Module
Discontinued Product: AA Euro 240 Vac Relay Module with Isolator (Replaced by the M201EA-240).
M220E Module
Discontinued Product. Analogue Addressable Euro Dual Input Module
M221E Module
Discontinued Product: AA Euro Dual Input + Single Relay Output Module (Replaced by the M221EA.)
VRT-100 Programmer
Programmer for VESDANet devices including VESDA aspirating smoke detectors
Fire Fan Controls
Discontinued Product. AA Fire Fan Controls (Replaced by the F100A Fan Controls).
AAMCP-MOD Module
Analogue Addressable MCP Conversion Module. Interfaces a conventional (NZS 4512) manual call point with a Pertronic AA loop.
6500RSCI Interface
Discontinued Product. Interface board for 6500 conventional beam detector
6500RSE Conventional Beam Detector
Discontinued Product. Conventional projected-beam smoke detector. Contact Pertronic for more information.
6500 AA Beam Detector
Discontinued Product. Analogue addressable projected beam smoke detector (Replaced by the OSI-RIE-34).
6200 Intelligent Beam Detector
Discontinued Product. Intelligent Optical Beam Reflector Smoke Detector. (Replaced by the 6500SE-34)
DNRHS
Discontinued Product. Analogue addressable high-sensitivity duct smoke detector (Replaced by the combination of DNR-AUS and 7351-IV).
B312NL Relay Base
Discontinued Product. Conventional Relay Base 12V Non-Latching
BEAMLRK Reflector
Long Range Reflector (70 - 100 m).
Used with 6500SE-34 & 6500RSE
Used with 6500SE-34 & 6500RSE
BEAMHK Heater Kit
Heater Kit (Indent only, used with 6500SE-34 & 6500RSE)
BEAMSMK Mounting Kit
Surface-mount kit for 6500SE-34 & 6500RSE
Indicating Heat Detector Kits
Discontinued product range. Indicating Heat Detector Kits. (Replaced by V-series, IHDBxx-V detector kits.)
BEAMMMK Mounting Kit
Multi-mount kit for 6500SE-34 & 6500RSE
BEAMHKR Heater Kit
Heater Kit (Indent only, used with 6500SE-34 & 6500RSE)
Remote Indicating Heat Detectors
Discontinued product range. Remote Indicating Heat Detectors. (Replaced by V-series, IHDxx-V detectors.)
6200R Conventional Beam Detector
Discontinued Product. Conventional Beam Smoke Detector (Replaced by the 6500RSE).
DH100ACDCLP Duct Detector
Discontinued Product. 4-Wire Photoelectric Air Duct Smoke Detector
AAMCP-TWP
Discontinued Product. Weatherproof Manual Call Point (Replaced by the AAMCP-TWP-MK2).
Indicating Heat Detectors
Discontinued product range. Conventional Indicating Heat Detectors. (Replaced by V-series, IHDxx-V detectors.)
RTS151KIT Remote Test Station
Remote indicator and test panel with key-switch enabled test mode for duct and beam detectors
CPPIN-3 MCP
Discontinued product. Conventional Indicating Manual Call Point. (Replaced by CPPIN-3T)
CPPIN-3TWP
Discontinued product. Weatherproof Manual Call Point. (Replaced by CPPIN-3TWP-MK2)
ISGAIFNZ
Discontinued Product. Galvanic isolator interface (Replaced by the ISGAIFNZSSAP).
7351 Pinnacle Detector
Pinnacle™ high-sensitivity analogue addressable smoke detector (Replaced by the 7251CPI).
1251BPI Detector
Discontinued Product: Ionization-type analogue addressable smoke detector.
Discontinued Pipes & Fittings
Discontinued aspirating pipes & pipe fittings. For replacements please refer to "Aspirating Pipes & Fittings" on this website.
Discontinued Products: Alarm (Alerting) Devices
E2XL15EG100V Speaker
Discontinued Product. 15 watt horn speaker for areas subject to explosive atmosphere (Replaced by the BEXL15DFV100AB1A1R)
ISBMTL7787+ Barrier
Discontinued Product. Intrinsically Safety Barrier Det MTL 7787+ Red :28V 300R
S900RLFIRE Strobe
Discontinued Product. SpectrAlert Strobe (Replaced by the SYS-STR-FIRE).
P4R Sounder Strobe
Discontinued Product. SpectrAlert Advance™ 4-wire conventional sounder + strobe. (Replaced by the P4RL.)
VAD-PC-I00 Strobe
AA visual alarm device (strobe) for wall or ceiling mounting. White body, white flash. Complies with AS ISO 7240.23 and EN54-23
S1224MC Strobe
Discontinued Product. SpectrAlert™ Selectable Strobe (Replaced by the SR).
PSSB524IEFT Speaker
Pertronic Speaker with B524IEFT Isolator Base
DUAL STROBE
Dual Strobe
P2RL Sounder Strobe
L Series wall-mount 2-wire conventional sounder + strobe with configurable tones, volume, and brightness settings. Red body, white flash
Discontinued Products: Power Supplies
24/4SWMP Power Supply
Discontinued product. Mains power supply module. Temp. compensated batt. Input: 230 V ac. Output: 24 V 4A dc. (Replaced by 24/4PSU)
AUX24/4PSU Power Supply
24 Volt 4 Amp Supervised PSU in Lockable Battery Cabinet
AUX24/12PSU Power Supply
24 Volt 12 Amp Supervised PSU in Lockable Battery Cabinet
BATCAB-550-NZ Battery Cabinet
Powder-coated steel battery cabinet. Accommodates batteries up to 38 Ah, Pertronic 24 Vdc power supply, & 24VCB control timer
AUX24V/1.3PSU-BLK PSU
Discontinued Product. 24 Volt 1.3 Amp Auxiliary Power Supply in Lockable Battery Cabinet. (Replaced by the AUX24V-1.5PSU-BLK).
24/1.3SWMPSU Power Supply
Discontinued product. 24 Volt 1.3 Amp Switch Mode Power Supply Module. (Replaced by 24-1.5SWMPS)
PSDR-120-24 PSU
Discontinued Product. Power Supply, DIN Rail Mounting, 230 Vac to 24 Vdc @ 5 Amp (Replaced by the PS-S8VK-S12024)
PSDR-4524 PSU
Discontinued Product. Power Supply, DIN Rail Mounting, 230 Vac to 24 Vdc @ 2 Amp (Replaced by the PSHDR-60-24)
BATBOX38 Cabinet
Discontinued Product. The BATBOX38 battery cabinet is replaced by the BATCAB-550-NZ.
Discontinued Products: Waterflow Devices
SGDFBA-X Brigade Alarm
Discontinued Product. Type X fire brigade alarm, with RS-485 multidrop LTX/SGD link and output to fire panel. (Replaced by the SGDFBA-XP.)
SGDFBA-Y Brigade Alarm
Discontinued Product. Type Y fire brigade alarm, with RS-485 multidrop LTX/SGD link and output to fire panel. (Replaced by the SGDFBA-YP.)
SGDBAXMD
Discontinued Product: X-Type DBA
SGDBAYMD
Discontinued product. Y-Type DBA
SGDBRESMD
Discontinued product. In the event of a sprinkler system activation, the Sprinkler Fire Brigade Alarm generates a fire alarm and triggers th
DBA Switch
Discontinued Product. Pressure switch. EPS120-2 used in SGDFBA (Types Y & X) and SGDDBA (Types Y & X)
