Isolate Timer Module
The Pertronic Isolate Timer Module isolates a zone for a user-programmed time period, after which the zone is automatically re-enabled
F100LRU Loop Relay
AA output module with 4 individually addressable channels: each with a switched, supervised 24 Vdc output, and a volt-free contact
Solenoid Interface
Interface units which allow allow analogue addressable control modules to activate and supervise a wide range of solenoids
IM-10 Module
Analogue addressable monitoring module with ten individually addressable inputs for normally-open contact devices
CR-6 Module
Analogue addressable control module with six voltage-free form-C (change-over) relay contacts
SC-6 Module
Analogue addressable control module with six supervised relay circuits for switching AC, DC, or audio
AAMCP-MOD Module
Analogue Addressable MCP Conversion Module. Interfaces a conventional (NZS 4512) manual call point with a Pertronic AA loop.
F100ZIPB Opto-Isolated IP Board
Eight-way opto-isolated input board for the Pertronic analogue addressable loop responder and multi-function loop responder
M201EA-240 Module
Intelligent addressable control module with one 2-pole output relay (1 pole NO, 1 pole NC). Built-in loop isolator
M201EA Module
Analogue addressable control module with one output channel. Built-in isolator for the AA loop
M210E-CZR Module
Interface between a conventional detection zone and an AA fire panel. Especially suitable for zones in areas subject to explosive atmosphere
M220EA Module
Analogue addressable monitor module with two input channels. Built-in isolator for the AA loop
M221EA Module
Analogue addressable control & monitor module with two input channels and one output channel. Built-in isolator for the AA loop
F220 Fan Controls
The F220 Fan Control System is used with the F220 fire panel to monitor and control air handling equipment for AS 1670.1-compliant.
F100A Fan Controls
F100A Fan Controls are used in Pertronic F100A, F120A and F220 fire alarm systems. Designed to comply with AS 1670.1-compliant.