Speakers

PSS1

100 Volt Line Speaker 1.1W

PSS5 Ceiling Speaker

100 mm ceiling mount speaker, 5 Watt, supervised 100 Vrms line, white

PSS5-LP Ceiling Speaker

100 mm low profile ceiling mount speaker, 5 Watt, supervised 100 Vrms line, white

PSS3 Ceiling Speaker

88 mm ceiling mount speaker, 3 Watt, supervised 100 Vrms line, white

PSS3-LP Ceiling Speaker

88 mm low profile ceiling mount speaker, 3 Watt, supervised 100 Vrms line, white

PSSHORN Speaker

100V 3W Horn Speaker

BCS-HS10E Speaker

10 watt IP66 weatherproof horn speaker, supervised 100 Vrms line

C2048 Speaker

10 watt IP 66 marine-grade weatherproof horn speaker, supervised 100 Vrms line

MPH-5300 Speaker

Horn Speaker 30 Watt weatherproof IP66 100 Volt line

PSS5-LPSME Surface Mount Enclosure

PSS5-LPSME Surface Mount Enclosure

PSS3-LP Surface Mount Enclosure

PSS3-LP Surface Mount Enclosure available in White and Black

PSSB501 Speaker

Pertronic Speaker with B501 Analogue Addressable Base

PSTIF Strobe Interface

An interface for driving L-Series, SpectrAlert Advance, or SpectrAlert strobes from Pertronic 100 Volt-Line circuits

PLPSSBMR Mount

Surface mount ring for speaker base, 125 mm diameter x 20 mm high. Suitable for Pertronic PSSB401 and PSSB501 speakers

PSS5-BK Ceiling Speaker

100 mm ceiling mount speaker, 5 Watt, supervised 100 Vrms line, black

PSS3-LP-BK Ceiling Speaker

88 mm low profile ceiling mount speaker, 3 Watt, supervised 100 Vrms line, black

EXTSPKRHOUS Speaker Housing

Vandal-resistant enclosure for horn speakers. Power-coated zintec.

Impedance Meter Mk2

Hand-held automatic audio impedance meter w. speaker load (wattage) display for 100 volt lines incl. fire & evacuation systems. Rechargeable

PSS Speaker w B401 Base

Pertronic Speaker with B401 Conventional Base

Speaker w Isolator Base

Pertronic Speaker with B524IEFT Isolator Base

Sounders

PS2

Pertronic Apartment Sounder

PS1

Pertronic Sounder

PS1400

Pertronic Sounder PA400 Tone

PSB

Analogue addressable detector base with built-in sounder

SSM Bell

Motor-driven bell suitable for the supervised Bell circuits on Pertronic fire panels, and other signaling applications

ZMB

Optional board for Pertronic fire alarm control panels. Allows independent activation of one or more bell circuits

CWSO Sounder

Conventional audible alarm device. Configurable alarm signal, with a choice of 32 recognised signals. Suits 12 volt and 24 volt systems.

VADs & Strobes

SCWL Strobe

L-Series ceiling-mount conventional strobe with seven field-configurable brightness settings. White body, white flash

LX-W-VAD

Visual alarm device (strobe) for wall mounting. Red or white flash. EN54-23 compliant.

DUAL STROBE

Dual Strobe

SYS-STR-FIRE Strobe

Visual alarm device (VAD) with red lens and field selectable brightness settings: 3, 16, or 25 candela

SRL Strobe

L-Series wall-mount conventional strobe with seven field-configurable brightness settings. Red body, white flash

SRK Strobe

Weatherproof visual alarm device with field adjustable brightness settings. Red body, white flash. IP56 rating

WST

Addressable wall-mount plug-in strobes

PSTIF Strobe Interface

An interface for driving L-Series, SpectrAlert Advance, or SpectrAlert strobes from Pertronic 100 Volt-Line circuits

PL1 LED Alarm

Pertronic LED Alarm

Strobe Lens

Coloured lenses for L-Series and SpectrAlert Advance strobes

ZMB

Optional board for Pertronic fire alarm control panels. Allows independent activation of one or more bell circuits

SBB-L

Surface-mounting back boxes for L Series alarm (alerting) devices. Available in wall-mount and ceiling-mount variants.

SCRL Strobe

L-Series ceiling-mount conventional strobe with seven field-configurable brightness settings. Red body, white flash

LX-C-VAD

Visual alarm device (strobe) for ceiling mounting. Red or white flash. EN54-23 compliant.

Sounder + Strobes

P4RL Sounder Strobe

L-Series wall-mount 4-wire conventional sounder + strobe with configurable tones, volume, and brightness. Red body, white flash

P2WL-P Sounder Strobe

L-Series wall-mount 2-wire conventional sounder + strobe with configurable tones, volume, and brightness settings. White body, white flash

PSTIF Strobe Interface

An interface for driving L-Series, SpectrAlert Advance, or SpectrAlert strobes from Pertronic 100 Volt-Line circuits

ZMB

Optional board for Pertronic fire alarm control panels. Allows independent activation of one or more bell circuits

P2RL Sounder Strobe

L Series wall-mount 2-wire conventional sounder + strobe with configurable tones, volume, and brightness settings. Red body, white flash

Amplifiers

EVAC50W24V Amplifier

Amplifier for supervised 100 V rms line evacuation systems, 50 watt rms audio output, 24 volt dc power supply

A1720 Tone Generator

A1720 MP3 Tone Generator & Message Player

EVACGEN EVAC Tone Generator

EVAC Tone Generator Module

EVAC20W24V Amplifier

Amplifier for supervised 100 V rms line evacuation systems, 20 watt rms audio output, 24 volt dc power supply

EVAC20W12V Amplifier

Amplifier for supervised 100 V rms line evacuation systems, 20 watt rms audio output, 12 volt dc power supply

EVAC250W24V Amplifier

Amplifier for supervised 100 V rms line evacuation systems, 250 watt rms audio output, 24 volt dc power supply

EVAC120W24V Amplifier

Amplifier for supervised 100 V rms line evacuation systems, 120 watt rms audio output, 24 volt dc power supply

EVAC50PREA Pre-Amp

Pre-Amp (Mic I/P) for EVAC50W24V Amplifier

PREAMP Pre-amplifier

External Microphone Signal Boost Pre-Amp

ADM-2 Audio Distribution Module

2-way audio distribution module with one 100 volt line input and two independently supervised 100 V rms audio output channels

ADM-4 Audio Distribution Module

4-way audio distribution module with one 100 volt line input and four independently supervised 100 V rms audio output channels

EVACHMIC Microphone

EWIS Hand Microphone

EVACDMIC Desk Microphone

Desk Microphone

PSTIF Strobe Interface

An interface for driving L-Series, SpectrAlert Advance, or SpectrAlert strobes from Pertronic 100 Volt-Line circuits

EA Speech Message Tool

Online Text to Speech tool for creating pre-recorded custom speech messages for Pertronic EA series amplifiers

WIP Phone

The Fire Phone Intercom is designed specifically for use as a warden intercom point (WIP) in emergency warning systems (EWS).

EAMIC Microphone

Fist microphone with PTT switch for emergency alerting and public address applications. Compatible only with Pertronic EA series amplifiers.

Microphone pre-amplifier

Microphone pre-amplifier for interfacing a remote microphone to the Pertronic 50 Watt 24 Volt evacuation amplifier EVAC50W24V

BCEWAPT Blocking Capacitor

Blocking Capacitor Unit for use when connecting analogue addressable modules such as the Apartment Module or M500S to an EWIS 100V-Line

EA60 Amplifier

Amplifier for supervised 100 V rms line evacuation systems, 60 watt rms audio output, 24 volt dc power supply

Impedance Meter Mk2

Hand-held automatic audio impedance meter w. speaker load (wattage) display for 100 volt lines incl. fire & evacuation systems. Rechargeable

EA120 Amplifier

Amplifier for supervised 100 V rms line evacuation systems, 120 watt audio output, 24 volt dc power supply

EABC Blocking Capacitor

Blocks the audio channel DC monitoring voltage to prevent erroneous monitoring faults from occurring when a common microphone is used.

AV Signs

AVS Weatherproof with Sounder

Audio Visual Sign, Weatherproof Version, with Sounder (Requires Separate Fascia)

Weatherproof Visual Warning Sign

Weatherproof Visual Warning Sign

Audio Visual Sign

Audio Visual Sign

AVSCM Countdown Module

Countdown Timer Module for Audio Visual Sign

Explosive Atmosphere

BEXL15DFV100AB1A1R Speaker

100V-Line 15 Watt horn speaker with series blocking capacitor for use in areas subject to explosive atmosphere

MTL5526

Two-channel switch-operated relay with intrinsically-safe outputs

A105N-IS Sounder

105 dB(A) Alarm Sounder (Indent product)

ISMTL5523 Solenoid Driver

Solenoid / alarm driver with galvanic isolator and line fault detection, for use in areas subject to explosive atmosphere

Mass Notification System

MNS

Mass Notification System

Wireless

Remote Vibrating Alarm System

Wireless system for deaf and hearing-impaired occupants. Controls up to 8 receivers, each with vibrating bed shaker and output for strobe